RC Community Celebration Join the Free Giveaway and Share Your Latest Build or RC Video
Nearly 100 members here on RC Groups®. More than 15,000 across our social channels.
That’s worth celebrating.
RC Groups® is growing fast because people keep showing up, posting projects, asking good questions, sharing videos, and helping others enjoy the hobby. Planes, cars, boats, drones, crawlers, scale builds, speed runs, foam repairs, 3D-printed parts, first flights, maiden crashes, bench tests, paint jobs, battery swaps, radio setup tips, all of it counts.
Thank you for your support in helping RC Groups® grow.
Now we want to keep the momentum going. Join the Free Giveaway group for a chance to win an RC model just by being part of the group and interacting. Then show us what you’re working on.
Why this milestone matters
A hobby community gets better when more people take part.
Nearly 100 members on RC Groups® means more build logs, more repair ideas, more setup tips, and more chances to learn from someone else’s work. Over 15,000 people across social channels means the reach is already bigger than one forum thread or one local flying field.
That matters because RC is hands-on. Photos and videos help in ways that plain text can’t.
A quick clip can show:
A steering servo that’s binding near full lock
A plane that’s tail-heavy on launch
A boat that’s porpoising at speed
A drone that has an oscillation problem
A crawler suspension setup that needs more droop
A paint finish that looks great in sunlight
A build photo can show even more. Wiring layout. Receiver placement. Battery tray work. Cooling holes. Motor mount alignment. Pushrod geometry. Solder joints. Reinforcement around weak points.
That’s the stuff that helps people. It also makes the hobby more fun.
Nobody needs a perfect shop or a showroom build. A work in progress is often more useful than a finished model. The unfinished stage is where the good questions happen.
Join the Free Giveaway group and get involved
The Free Giveaway group is simple. Join the group, take part, and you’ll have a chance to win an RC model.
The best part is that you don’t need to be an expert. You don’t need the cleanest build. You don’t need a viral video. You just need to be part of the group and interact.
That interaction is what keeps a community active.
Good ways to take part include:
Posting a photo of your current build
Sharing a short video from a run, flight, or test
Commenting on someone else’s WIP
Asking a setup question
Sharing what worked after a repair
Posting a parts change and explaining why you made it
Showing a before-and-after fix
Giving feedback when someone asks for help
Even a short post can start a useful thread.
For example, a photo of a plane with the caption “Maiden this weekend, CG set at the manual’s recommended point” can lead to helpful replies. Someone might ask about control throws. Someone else might suggest a range check. Another person may notice a prop direction issue before the model ever leaves the ground.
That’s the value of community.
What to share if you’re building something right now
Post the current state of the project. Don’t wait until it’s finished.
The best WIP posts usually show one clear thing. That keeps the thread easy to follow and makes it easier for people to reply.
Here are a few easy post ideas.
Show the bench stage
Take one photo of the model on the bench. Add a few details.
Mention:
The model type
The power setup
The radio system if it matters
What stage the build is in
What you’re stuck on, if anything
Example:
“Working on a 1/10 crawler body this week. Trim is done, paint is next. Still deciding between a clean scale look or weathered trail rig style.”
That’s enough to start a conversation.
Show a repair
Repairs teach people a lot.
A cracked foam nose, broken A-arm, stripped servo horn, bent prop shaft, or water intrusion fix can help someone else avoid the same problem.
Post a before photo, an after photo, and one sentence on what you used. If you reinforced a foam wing with carbon, say where you placed it. If you waterproofed a receiver box, say what sealant or method you used, without overselling it.
Show a setup choice
People love setup details because small changes can make a big difference.
You can share:
Tire compound changes on an RC car
Prop size changes on a plane or boat
Battery placement changes
ESC settings
Suspension oil or spring changes
Flight controller tuning notes
Servo upgrades
Gear ratio changes
You don’t need to write a full guide. A short “I changed this, and here’s what happened” post is useful.
Ask the simple question
Simple questions are welcome. They also help others who were wondering the same thing.
Try questions like:
“Does this antenna placement look okay?”
“Would you add ventilation here?”
“Is this motor mount angle normal?”
“Should I balance this prop again?”
“Does this crawler sit too high?”
“Is this battery strap setup safe enough?”
Good questions make good threads.
What to share if you have a new RC video
Videos are great because they show movement, sound, handling, speed, and control.
A 15-second clip can say more than a long paragraph. The key is to add a little context so people know what they’re watching.
If you post a video, include:
What model it is
Where it was used, in general terms
What setup you’re running
What you want feedback on
Whether it was a test, maiden, race, trail run, or casual session
You don’t need fancy editing. Clear footage is enough.
For planes
Show the takeoff, a few passes, and the landing if you can. If the plane balloons, dives, wobbles, or needs a lot of trim, say so. That helps others give better input.
Helpful notes include:
CG location
Prop and battery used
Control rates
Wind conditions
Any trim changes after launch
For cars and trucks
Record a clean pass, a few turns, or an obstacle section. Show the problem if there is one.
Helpful notes include:
Battery type
Motor and ESC setup
Tire choice
Surface type
Any gearing or suspension changes
For crawlers, slow footage is often better than fast footage. It shows tire grip, weight transfer, and suspension movement.
For boats
Show launch, throttle-up, turns, and retrieval if possible. Boats can be hard to diagnose from one angle, so a side view helps.
Helpful notes include:
Prop size
Battery setup
Water conditions
Cooling setup
Hull behavior at speed
If the boat hops, leans, cavitates, or loses cooling flow, say when it happens.
For drones
Short clips work well for drones. Include whether the flight was line-of-sight, FPV, tuning, freestyle, racing practice, or a basic hover test.
Helpful notes include:
Frame size
Prop size
Battery cell count
Flight controller tune changes
Any vibration or video issues
If you want tuning feedback, steady hover footage and slow punch-outs are useful.
Good posts don’t need to be perfect
Don’t overthink it.
A useful community post can be rough. A phone photo is fine. A short clip is fine. A messy bench is fine. A half-finished body shell is fine.
What matters is that the post gives people something real to respond to.
A strong post usually has three parts:
What it is
Name the model or type of RC.
What’s happening
Say whether it’s a build, repair, test, tune, or run.
What you want
Ask for feedback, share the result, or invite others to show their setup.
Here’s a simple format you can copy:
“Current WIP. This is my [model/type]. I’m working on [part of the build]. I’m using [main setup details]. Any tips before I test it?”
That’s it.
What makes RC Groups® worth building together
RC covers a huge range of skills.
One person may know foam repair. Another knows brushless motors. Someone else understands suspension geometry. Another person can spot a bad solder joint from one photo. Someone may be great with scale details, paint, wiring, 3D printing, tuning, radio setup, or first-flight checks.
When everyone shares a little, the whole group gets better.
That’s why your post matters even if you’re new.
A beginner’s first build can remind experienced hobbyists what new people struggle with. An experienced builder’s detailed post can save someone hours. A crash video can teach launch technique. A crawler clip can start a tire discussion. A boat setup post can help someone understand trim tabs or prop changes. A drone tune clip can help identify vibration.
This is how a strong RC community works. People share the real steps, not just the finished result.
Quick tips before you post
Keep it clear. Keep it friendly. Keep it useful.
A few easy tips:
Use good light when taking photos
Get close enough to show the part you’re discussing
Mention the model type
Include setup details when they matter
Say what changed if you made a modification
Add the result if you tested it
Ask one clear question if you need help
Reply when people comment
That last one matters. A thread gets better when the original poster comes back with updates.
If someone suggests a fix and it works, say so. That helps the next person who finds the thread later.
Join the giveaway and share what’s on your bench
If you haven’t joined yet, this is a good time.
Become part of the Free Giveaway group, interact with the community, and share your current WIP, build, repair, run, flight, or newest RC video.
Planes, cars, boats, drones, crawlers, bashers, racers, scale builds, scratch builds, foamies, kits, ARFs, RTRs, custom rigs, all are welcome.
FAQ
Do I need to post a finished RC model to take part?
No. WIP posts are welcome. A build in progress often starts better discussion than a finished model.
What kinds of RC models can I share?
Share planes, cars, trucks, boats, drones, crawlers, or any other RC project. If it’s RC related, it fits.
Do I need a professional video setup?
No. A clear phone video is enough. Try to show the model moving, and add a few details about the setup.
Can beginners join the giveaway group?
Yes. Beginners are welcome. Ask questions, share progress, and interact with other members.
What should I include with my post?
Include the model type, what you’re working on, any key setup details, and what feedback you want. Short and clear is best.
Let’s keep the momentum going
The numbers are exciting, but the posts are what matter.
Every build photo, test video, repair note, and setup question adds something useful. It helps someone else learn. It gives people ideas. It keeps the group active.
So post the project that’s on your bench right now. Share the clip from your latest run or flight. Ask the question you’ve been holding back.
And if you’re here supporting RC Groups®, thank you. This community is growing because people keep showing up and taking part.
Comments